News
SDKeli KLM safety lidar is suitable for collision prevention of mobile robots. The typical application is automated guided vehicle (AGV) and rail guided vehicle (RGV). KLM is designed to be safe at indoor use which the intended environment is POLLUTION DEGREE 2 according to IEC 61010-1.
2) KLM cannot detect transparent and translucent objects.
The size of objects that go into the detection zone must be greater than or equal to the detection capability of KLM.
light, impact and vibration).
2) Places with flammable or explosive gas.
3) Places with smoke, particles, corrosive chemicals and other substances.
4) Places that may generate strong light interference (such as direct light) on the KLM.
The detection object of KLM must meet the following conditions:
1) Only protect the objects that go into the detection zone.2) KLM cannot detect transparent and translucent objects.
The size of objects that go into the detection zone must be greater than or equal to the detection capability of KLM.
Do not install KLM in the following environments:
1) Places outside the range of environment specified in the Operation Instructions (temperature, humidity, interferencelight, impact and vibration).
2) Places with flammable or explosive gas.
3) Places with smoke, particles, corrosive chemicals and other substances.
4) Places that may generate strong light interference (such as direct light) on the KLM.
Working principles
KLM is designed based on pulsed laser ranging principles to realize the two dimensional zone detection with an angle of 276° and radius of 120m (Max.) through rotational scanning.
Documents
KLM Safety Lidar manual
769,2 KB